#acupoftea - mail.ontime-ae.com

System	:	Linux server1.ontime-gulf.com 4.18.0-553.5.1.el8_10.x86_64 #1 SMP Wed Jun 5 09:12:13 EDT 2024 x86_64
Software	:	Apache
Server	:	162.0.230.206
Domains	:	40 Domain
Permission	:	[ drwxr-xr-x ]
	:	/ usr / share / mysql /

216.73.216.49

Home

File mysql.server

#!/bin/sh
# Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB
# This file is public domain and comes with NO WARRANTY of any kind

# MariaDB daemon start/stop script.

# Usually this is put in /etc/init.d (at least on machines SYSV R4 based
# systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql.
# When this is done the mysql server will be started when the machine is
# started and shut down when the systems goes down.

# Comments to support chkconfig on Red Hat Linux
# chkconfig: 2345 64 36
# description: A very fast and reliable SQL database engine.

# Comments to support LSB init script conventions
### BEGIN INIT INFO
# Provides: mysql
# Required-Start: $local_fs $network $remote_fs
# Should-Start: ypbind nscd ldap ntpd xntpd
# Required-Stop: $local_fs $network $remote_fs
# Default-Start:  2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: start and stop MariaDB
# Description: MariaDB is a very fast and reliable SQL database engine.
### END INIT INFO

# have to do one of the following things for this script to work:
#
# - Run this script from within the MariaDB installation directory
# - Create a /etc/my.cnf file with the following information:
#   [mysqld]
#   basedir=<path-to-mysql-installation-directory>
# - Add the above to any other configuration file (for example ~/.my.ini)
#   and copy my_print_defaults to /usr/bin
# - Add the path to the mysql-installation-directory to the basedir variable
#   below.
#
# If you want to affect other MariaDB variables, you should make your changes
# in the /etc/my.cnf, ~/.my.cnf or other MariaDB configuration files.

# If you change base dir, you must also change datadir. These may get
# overwritten by settings in the MariaDB configuration files.

basedir=
datadir=

# Default value, in seconds, afterwhich the script should timeout waiting
# for server start.
# Value here is overridden by value in my.cnf.
# 0 means don't wait at all
# Negative numbers mean to wait indefinitely
service_startup_timeout=900

# Lock directory for Red Hat / SuSE.
lockdir='/var/lock/subsys'
lock_file_path="$lockdir/mysql"

# The following variables are only set for letting mysql.server find things.

# Set some defaults
mariadbd_pid_file_path=
if test -z "$basedir"
then
  basedir=/usr
  bindir=/usr/bin
  if test -z "$datadir"
  then
    datadir=/var/lib/mysql
  fi
  sbindir=/usr/sbin
  libexecdir=/usr/sbin
else
  bindir="$basedir/bin"
  if test -z "$datadir"
  then
    datadir="$basedir/data"
  fi
  sbindir="$basedir/sbin"
  if test -f "$basedir/bin/mariadbd"
  then
    libexecdir="$basedir/bin"
  else
    libexecdir="$basedir/libexec"
  fi
fi

# datadir_set is used to determine if datadir was set (and so should be
# *not* set inside of the --basedir= handler.)
datadir_set=

#
# Use LSB init script functions for printing messages, if possible
# Include non-LSB Red Hat init functions to make systemctl redirect work
init_functions="/etc/init.d/functions"
lsb_functions="/lib/lsb/init-functions"
if test -f $lsb_functions; then
  . $lsb_functions
fi

if test -f $init_functions; then
  . $init_functions
else
  log_success_msg()
  {
    echo " SUCCESS! $@"
  }
  log_failure_msg()
  {
    echo " ERROR! $@"
  }
fi

PATH="/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin"
export PATH

mode=$1    # start or stop

[ $# -ge 1 ] && shift

case `echo "testing\c"`,`echo -n testing` in
    *c*,-n*) echo_n=   echo_c=     ;;
    *c*,*)   echo_n=-n echo_c=     ;;
    *)       echo_n=   echo_c='\c' ;;
esac

parse_server_arguments() {
  for arg do
    val=`echo "$arg" | sed -e 's/^[^=]*=//'`
    case "$arg" in
      --basedir=*)  basedir="$val"
                    bindir="$basedir/bin"
		    if test -z "$datadir_set"; then
		      datadir="$basedir/data"
		    fi
		    sbindir="$basedir/sbin"
                    if test -f "$basedir/bin/mariadbd"
                    then
                      libexecdir="$basedir/bin"
                    else
                      libexecdir="$basedir/libexec"
                    fi
		    libexecdir="$basedir/libexec"
        ;;
      --datadir=*)  datadir="$val"
		    datadir_set=1
	;;
      --log-basename=*|--hostname=*|--loose-log-basename=*)
        mariadbd_pid_file_path="$val.pid"
	;;
      --pid-file=*) mariadbd_pid_file_path="$val" ;;
      --service-startup-timeout=*) service_startup_timeout="$val" ;;
      --user=*) user="$val"; ;;
    esac
  done
}

# Get arguments from the my.cnf file,
# the only group, which is read from now on is [mysqld]
if test -x "$bindir/my_print_defaults";  then
  print_defaults="$bindir/my_print_defaults"
else
  # Try to find basedir in /etc/my.cnf
  conf=/etc/my.cnf
  print_defaults=
  if test -r $conf
  then
    subpat='^[^=]*basedir[^=]*=$.*$$'
    dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf`
    for d in $dirs
    do
      d=`echo $d | sed -e 's/[ 	]//g'`
      if test -x "$d/bin/my_print_defaults"
      then
        print_defaults="$d/bin/my_print_defaults"
        break
      fi
    done
  fi

# Hope it's in the PATH ... but I doubt it
  test -z "$print_defaults" && print_defaults="my_print_defaults"
fi

user='mysql'

su_kill() {
  if test "$USER" = "$user"; then
    kill $* >/dev/null 2>&1
  else
    su - $user -s /bin/sh -c "kill $*" >/dev/null 2>&1
  fi
}

#
# Read defaults file from 'basedir'.   If there is no defaults file there
# check if it's in the old (depricated) place (datadir) and read it from there
#

extra_args=""
if test -r "$basedir/my.cnf"
then
  extra_args="--defaults-extra-file= $basedir/my.cnf"
else
  if test -r "$datadir/my.cnf"
  then
    extra_args="--defaults-extra-file= $datadir/my.cnf"
  fi
fi

parse_server_arguments `$print_defaults $extra_args --mysqld mysql.server`
parse_server_arguments "$@"

# wait for the pid file to disappear
wait_for_gone () {
  pid="$1"           # process ID of the program operating on the pid-file
  pid_file_path="$2" # path to the PID file.

i=0
  crash_protection="by checking again"

while test $i -ne $service_startup_timeout ; do

if su_kill -0 "$pid" ; then
      :  # the server still runs
    else
      if test ! -s "$pid_file_path"; then
        # no server process and no pid-file? great, we're done!
        log_success_msg
        return 0
      fi

# pid-file exists, the server process doesn't.
      # it must've crashed, and mysqld_safe will restart it
      if test -n "$crash_protection"; then
        crash_protection=""
        sleep 5
        continue  # Check again.
      fi

# Cannot help it
      log_failure_msg "The server quit without updating PID file ($pid_file_path)."
      return 1  # not waiting any more.
    fi

echo $echo_n ".$echo_c"
    i=`expr $i + 1`
    sleep 1

done

log_failure_msg
  return 1
}

wait_for_ready () {

i=0
  while test $i -ne $service_startup_timeout ; do

if $bindir/mysqladmin ping >/dev/null 2>&1; then
      log_success_msg
      return 0
    elif kill -0 $! ; then
      :  # mysqld_safe is still running
    else
      # mysqld_safe is no longer running, abort the wait loop
      break
    fi

echo $echo_n ".$echo_c"
    i=`expr $i + 1`
    sleep 1

done

log_failure_msg
  return 1
}
#
# Set pid file if not given
#
if test -z "$mariadbd_pid_file_path"
then
  mariadbd_pid_file_path=$datadir/`uname -n`.pid
else
  case "$mariadbd_pid_file_path" in
    /* ) ;;
    * )  mariadbd_pid_file_path="$datadir/$mariadbd_pid_file_path" ;;
  esac
fi

# source other config files
[ -f /etc/default/mysql ] && . /etc/default/mysql
[ -f /etc/sysconfig/mysql ] && . /etc/sysconfig/mysql
[ -f /etc/conf.d/mysql ] && . /etc/conf.d/mysql

case "$mode" in
  'start')
    # Start daemon

# Safeguard (relative paths, core dumps..)
    cd $basedir

echo $echo_n "Starting MariaDB"
    if test -x $bindir/mysqld_safe
    then
      # Give extra arguments to mysqld with the my.cnf file. This script
      # may be overwritten at next upgrade.
      $bindir/mysqld_safe --datadir="$datadir" --pid-file="$mariadbd_pid_file_path" "$@" &
      wait_for_ready; return_value=$?

# Make lock for Red Hat / SuSE
      if test -w "$lockdir"
      then
        touch "$lock_file_path"
      fi

exit $return_value
    else
      log_failure_msg "Couldn't find MariaDB server ($bindir/mysqld_safe)"
    fi
    ;;

'stop')
    # Stop daemon. We use a signal here to avoid having to know the
    # root password.

if test -s "$mariadbd_pid_file_path"
    then
      mariadbd_pid=`cat "$mariadbd_pid_file_path"`

if su_kill -0 $mariadbd_pid ; then
        echo $echo_n "Shutting down MariaDB"
        su_kill $mariadbd_pid
        # mysqld should remove the pid file when it exits, so wait for it.
        wait_for_gone $mariadbd_pid "$mariadbd_pid_file_path"; return_value=$?
      else
        log_failure_msg "MariaDB server process #$mariadbd_pid is not running!"
        rm "$mariadbd_pid_file_path"
      fi

# Delete lock for Red Hat / SuSE
      if test -f "$lock_file_path"
      then
        rm -f "$lock_file_path"
      fi
      exit $return_value
    else
      log_failure_msg "MariaDB server PID file could not be found!"
    fi
    ;;

'restart')
    # Stop the service and regardless of whether it was
    # running or not, start it again.
    if $0 stop  "$@"; then
      if ! $0 start "$@"; then
        log_failure_msg "Failed to restart server."
        exit 1
      fi
    else
      log_failure_msg "Failed to stop running server, so refusing to try to start."
      exit 1
    fi
    ;;

'reload'|'force-reload')
    if test -s "$mariadbd_pid_file_path" ; then
      read mariadbd_pid <  "$mariadbd_pid_file_path"
      su_kill -HUP $mariadbd_pid && log_success_msg "Reloading service MariaDB"
      touch "$mariadbd_pid_file_path"
    else
      log_failure_msg "MariaDB PID file could not be found!"
      exit 1
    fi
    ;;
  'status')
    # First, check to see if pid file exists
    if test -s "$mariadbd_pid_file_path" ; then
      read mariadbd_pid < "$mariadbd_pid_file_path"
      if su_kill -0 $mariadbd_pid ; then
        log_success_msg "MariaDB running ($mariadbd_pid)"
        exit 0
      else
        log_failure_msg "MariaDB is not running, but PID file exists"
        exit 1
      fi
    else
      # Try to find appropriate mariadbd process
      mariadbd_pid=`pgrep -f $libexecdir/mariadbd`

# test if multiple pids exist
      pid_count=`echo $mariadbd_pid | wc -w`
      if test $pid_count -gt 1 ; then
        log_failure_msg "Multiple MariaDB running but PID file could not be found ($mariadbd_pid)"
        exit 5
      elif test -z $mariadbd_pid ; then
        if test -f "$lock_file_path" ; then
          log_failure_msg "MariaDB is not running, but lock file ($lock_file_path) exists"
          exit 2
        fi
        log_failure_msg "MariaDB is not running"
        exit 3
      else
        log_failure_msg "MariaDB is running but PID file could not be found"
        exit 4
      fi
    fi
    ;;
  'configtest')
    # Safeguard (relative paths, core dumps..)
    cd $basedir
    echo $echo_n "Testing MariaDB configuration syntax"
    daemon=$bindir/mariadbd
    if test -x $libexecdir/mariadbd
    then
      daemon=$libexecdir/mariadbd
    elif test -x $sbindir/mariadbd
    then
      daemon=$sbindir/mariadbd
    elif test -x `which mariadbd`
    then
      daemon=`which mariadbd`
    else
      log_failure_msg "Unable to locate the mariadbd binary!"
      exit 1
    fi
    help_out=`$daemon --help 2>&1`; r=$?
    if test "$r" != 0 ; then
      log_failure_msg "$help_out"
      log_failure_msg "There are syntax errors in the server configuration. Please fix them!"
    else
      log_success_msg "Syntax OK"
    fi
    exit $r
    ;;
  'bootstrap')
      if test "$_use_systemctl" == 1 ; then
        log_failure_msg "Please use galera_new_cluster to start the mariadb service with --wsrep-new-cluster"
        exit 1
      fi
      # Bootstrap the cluster, start the first node
      # that initiate the cluster
      echo $echo_n "Bootstrapping the cluster.. "
      $0 start $other_args --wsrep-new-cluster
      exit $?
      ;;
  *)
      # usage
      basename=`basename "$0"`
      echo "Usage: $basename  {start|stop|restart|reload|force-reload|status|configtest|bootstrap}  [ MariaDB server options ]"
      exit 1
    ;;
esac

exit 0

Name	Type	Size	Permission	Last Modified	Actions
.	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
..	DIR	-	drwxr-xr-x	2025-10-16 10:59:21
bulgarian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
charsets	DIR	-	drwxr-xr-x	2025-08-07 11:00:47
chinese	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
czech	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
danish	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
dutch	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
english	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
estonian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
french	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
german	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
greek	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
hindi	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
hungarian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
italian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
japanese	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
korean	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
norwegian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
norwegian-ny	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
policy	DIR	-	drwxr-xr-x	2025-07-28 05:05:53
polish	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
portuguese	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
romanian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
russian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
serbian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
slovak	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
spanish	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
swedish	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
systemd	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
ukrainian	DIR	-	drwxr-xr-x	2025-08-07 11:01:09
binary-configure	text/x-shellscript	1.13 KB	-rwxr-xr-x	2025-07-28 03:57:47
errmsg-utf8.txt	text/plain	699.67 KB	-rw-r--r--	2025-07-28 03:52:27
fill_help_tables.sql	text/plain	2.06 MB	-rw-r--r--	2025-07-28 03:52:27
magic	text/plain	1.44 KB	-rw-r--r--	2025-07-28 03:52:28
maria_add_gis_sp.sql	text/plain	1.67 KB	-rw-r--r--	2025-07-28 03:57:47
maria_add_gis_sp_bootstrap.sql	text/plain	1.64 KB	-rw-r--r--	2025-07-28 03:57:47
mysql-log-rotate	text/plain	894 B	-rw-r--r--	2025-07-28 03:57:47
mysql.server	text/x-shellscript	12.02 KB	-rwxr-xr-x	2025-07-28 03:57:47
mysql_performance_tables.sql	text/plain	1.91 KB	-rw-r--r--	2025-07-28 03:52:27
mysql_sys_schema.sql	text/plain	605.2 KB	-rw-r--r--	2025-07-28 03:57:47
mysql_system_tables.sql	text/plain	29.86 KB	-rw-r--r--	2025-07-28 03:52:27
mysql_system_tables_data.sql	text/plain	3.25 KB	-rw-r--r--	2025-07-28 03:52:27
mysql_test_data_timezone.sql	text/plain	10.17 KB	-rw-r--r--	2025-07-28 03:52:27
mysql_test_db.sql	text/plain	1.64 KB	-rw-r--r--	2025-07-28 03:52:27
mysqld_multi.server	text/x-shellscript	1.53 KB	-rwxr-xr-x	2025-07-28 03:57:47
wsrep.cnf	text/plain	3.39 KB	-rw-r--r--	2025-07-28 03:57:47
wsrep_notify	text/x-shellscript	4.86 KB	-rwxr-xr-x	2025-07-28 03:57:47

~ ACUPOFTEA - mail.ontime-ae.com